Water Hammer Valves / Fittings
- Product Type
- Hose Valve with Integral Water Hammer Arrester
- Fem. Swivel Hose X Male Hose X Water Hammer Arrester
- Regular Brass
- Rough Brass
- Plated Handle
- Inlet Pipe Type
- Outlet Pipe Type
- Box / Case
- 12 / 72
- Working Pressure
- 250 PSI
- Working Temperature
- Cv Valve
- Unit Weight (lbs.)
Instructions for 221-04F-04-14WHA
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
HOSE: Tighten firmly. DO NOT OVER-TIGHTEN.
Position arrester at any angle.
Features and Benefits
Stops banging pipes!
Convert washing machine supplies to 1/4 turn in seconds and eliminate water hammer at the same time!
Every valve is tested before leaving our factory.
They may build them with something else, but they fix them with these.