dahl Ask for it by nameĀ®

Water Hammer Valves / Fittings

No image is available for 511-01-04-14WHA

Hose 511-01-04-14WHA

Product Type
Hose Valve with Integral Water Hammer Arrester
Description
1/2 Fem. Solder or 1/2 MIP X Male Hose X Water Hammer Arrester
Material
Lead-Free Brass

Specifications

Pattern
Straight
Finish
Plated
Operation
Plated Handle

Inlet

Inlet Pipe Type
Iron
Inlet Size
1/2

Outlet

Outlet Pipe Type
Hose

Branch

Branch Pipe Type
Water Hammer Arrester

Packaging Details

Box / Case
12 / 72

Instructions for 511-01-04-14WHA

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.

FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.

HOSE: Tighten firmly. DO NOT OVER-TIGHTEN.

Position arrester at any angle.

Certifications


NSF/ANSI/CAN 372
NSF/ANSI/CAN 61: Q≤0.5

ASSE 1010