mini-ball™ Valves
|
|
|
Supply Stops 611-13-L5 (Copper)
- Product Type
- Supply Stop
- Description
- 1/2 Fem. Solder X 1/2 or 7/16 OD Slip Joint
- Material
- Lead-Free Brass
Specifications
- Pattern
- Angle
- Finish
- Plated
- Operation
- Plated Handle
Inlet
- Inlet Pipe Type
- Copper
- Inlet Size
- 1/2
Outlet
- Outlet Pipe Type
- Copper
- Outlet Size
- 1/2 or 7/16 OD
Packaging Details
- Box / Case
- 12 / 72
Instructions for 611-13-L5
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
SLIP JOINT: Do not use pipe dope or tape. Pipe must be clean, round, cut square. Choose ring that fits snugly on the pipe, discard the other. Slide nut and ring over pipe. Create bead 3/8" to 1/2" from end of pipe with beading tool. Slide grommet on pipe, large end against bead. Attach to valve & tighten. DO NOT OVERTIGHTEN.
Features and Benefits
Every valve is tested before leaving our factory.
They may build them with something else, but they fix them with these.