Dahl Valve Limited

mini-ball™ Valves

No image is available for 611-13-31-PK2

Supply Stops 611-13-31-PK2 (Copper)

Product Type
Supply Stop
Description
1/2 Fem. Solder X 3/8 OD Comp, Pk of 2
Material
Lead-Free Brass

Specifications

Pattern
Angle
Finish
Plated
Operation
Plated Handle

Inlet

Inlet Pipe Type
Copper
Inlet Size
1/2

Outlet

Outlet Pipe Type
Copper Compression
Outlet Size
3/8 OD Comp

Packaging Details

Box / Case
12 / 72

Instructions for 611-13-31-PK2

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.

COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.

Certifications

NSF/ANSI 61-G