dahl Ask for it by nameĀ®

mini-ball™ Valves

mini-ball™Valves, In-Line Stops & Isolation 521LB-13-13D (In-Line Stops with Drain / Waste)

In-Line Stops & Isolation 521LB-13-13D (In-Line Stops with Drain / Waste)

Product Type
Stop & Drain (Waste) Valve
Description
1/2 Fem. Solder X 1/2 Fem. Solder w/Drain
Material
Lead-Free Brass

Specifications

Pattern
Straight
Finish
Rough Brass
Operation
Plated Handle

Inlet

Inlet Pipe Type
Copper
Inlet Size
1/2

Outlet

Outlet Pipe Type
Copper
Outlet Size
1/2

Packaging Details

Box / Case
12 / 72

Dimensions

Unit Weight (lbs.)
0.5430

Instructions for 521LB-13-13D

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.

Features and Benefits

In-Line Stop with Drain Screw and O-ring seal.

Hundreds of models available.

Every valve is tested before leaving our factory.

They may build them with something else, but they fix them with these.

Certifications


NSF/ANSI/CAN 372
NSF/ANSI/CAN 61: Q≤0.5

Documentation

Options

Options (French)