dahl Ask for it by nameĀ®

mini-ball™ Valves

No image is available for 221-01-04BT2

Hose and Boiler Drain 221-01-04BT2 (Iron)

Product Type
Hose Valve
Description
1/2 Fem. Solder or 1/2 MIP x Male Hose with 1/4 Branch Tapping
Material
Regular Brass

Specifications

Pattern
Angle
Finish
Rough Brass
Operation
Plated Handle

Inlet

Inlet Pipe Type
Iron
Inlet Size
1/2

Outlet

Outlet Pipe Type
Hose

Packaging Details

Box / Case
12 / 72

Operating Specifications

Working Pressure
250 PSI
Working Temperature
250

Dimensions

Unit Weight (lbs.)
0.6878

Instructions for 221-01-04BT2

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.

FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.

HOSE: Tighten firmly. DO NOT OVER-TIGHTEN.

Features and Benefits

hose valves are suitable for both plumbing and heating applications.

Every valve is tested before leaving our factory.

Certifications

Documentation

Options

Options (French)