dahl Ask for it by nameĀ®

Water Hammer Valves / Fittings

No image is available for 511-PRPX3-32-14WHA

Supply Stops 511-PRPX3-32-14WHA

Product Type
Supply Stop with Integral Water Hammer Arrester
Description
1/2 F1960 X 1/2 OD Comp X Water Hammer Arrester
Material
Lead-Free Brass

Specifications

Pattern
Straight
Finish
Plated
Operation
Plated Handle

Inlet

Inlet Pipe Type
PEX
Inlet Size
1/2

Outlet

Outlet Pipe Type
Copper
Outlet Size
1/2 OD

Branch

Branch Pipe Type
Water Hammer Arrester

Packaging Details

Box / Case
12 / 72

Instructions for 511-PRPX3-32-14WHA

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

F1960 COLD EXPANSION CONNECTION FOR PEX-A ONLY: Follow tube manufacturer's instructions. Warning: Do not attempt to use PEX connections with Poly-B tubing or vice versa.

COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.

Position arrester at any angle.

ASTM

ASTM F1960

Certifications


NSF/ANSI/CAN 372
NSF/ANSI/CAN 61: Q≤0.5

ASSE 1010