dahl Ask for it by nameĀ®

Water Hammer Valves / Fittings

Water HammerValves / Fittings, Hose 111-33-04-14WHA

Hose 111-33-04-14WHA

Product Type
Hose Valve with Integral Water Hammer Arrester
Description
5/8 OD Comp X Male Hose X Water Hammer Arrester
Material
Regular Brass

Specifications

Pattern
Straight
Finish
Plated
Operation
Plated Handle

Inlet

Inlet Pipe Type
Copper
Inlet Size
5/8 OD

Outlet

Outlet Pipe Type
Hose

Packaging Details

Box / Case
12 / 72

Operating Specifications

Working Pressure
250 PSI
Working Temperature
250
Cv Valve
3.0

Dimensions

Unit Weight (lbs.)
0.5830

Instructions for 111-33-04-14WHA

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.

HOSE: Tighten firmly. DO NOT OVER-TIGHTEN.

Position arrester at any angle.

Features and Benefits

Stops banging pipes!

Convert washing machine supplies to 1/4 turn in seconds and eliminate water hammer at the same time!

Every valve is tested before leaving our factory.

They may build them with something else, but they fix them with these.