Dahl Valve Limited

mini-ball™ Valves

mini-ball™Valves, Tee + Valve Kits EQG3-2212 (3/8 Compression Outlet)

Tee + Valve Kits EQG3-2212 (3/8 Compression Outlet)

Product Type
Valve Kit
Description
1/2 QUICK-GRIP X 1/2 QUICK-GRIP x 3/8 OD Comp
Material
Lead-Free Brass

Specifications

Pattern
Straight
Finish
Rough Brass
Operation
Plated Handle

Inlet

Inlet Pipe Type
Copper, PEX, CPVC
Inlet Size
1/2

Outlet

Outlet Pipe Type
Copper, PEX, CPVC
Outlet Size
1/2

Branch

Branch Pipe Type
Copper
Branch Size
3/8 OD

Packaging Details

Box / Case
10 / 60

Dimensions

Unit Weight (lbs.)
1.0243

Instructions for EQG3-2212

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

QUICK-GRIP™ For 1/2" Copper, PEX or CPVC pipe, in accessible locations only. NOT for Kitec® , PEX-AL-PEX, Poly-B, plated pipe. Cut pipe & de-burr. Mark pipe 1-1/8" (2.9 cm) from end. (PEX only: Install pipe insert). QUICK-GRIP™ must be free of debris. Push valve onto pipe to the mark. Pull to test joint. Removal: Remove Locking Clip, depress end of QUICK-GRIP™, pull valve off.

COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.

Features and Benefits

The quality alternative to saddle valves.

Hundreds of custom models available.

Every valve is tested before leaving our factory.

They may build them with something else, but they fix them with these.

Certifications

NSF/ANSI 61-G

ASSE 1061