dahl Ask for it by nameĀ®

mini-ball™ Valves

mini-ball™Valves, Tee + Valve Kits E13-2212 (3/8 Compression Outlet)

Tee + Valve Kits E13-2212 (3/8 Compression Outlet)

Product Type
Valve Kit
Description
1/2 Fem. Solder x 1/2 Fem. Solder x 3/8 OD Comp
Material
Lead-Free Brass

Specifications

Pattern
Straight
Finish
Rough Brass
Operation
Plated Handle

Inlet

Inlet Pipe Type
Copper
Inlet Size
1/2

Outlet

Outlet Pipe Type
Copper
Outlet Size
1/2

Branch

Branch Pipe Type
Copper
Branch Size
3/8 OD

Packaging Details

Box / Case
10 / 60

Dimensions

Unit Weight (lbs.)
0.5992

Instructions for E13-2212

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.

COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.

Certifications


NSF/ANSI/CAN 372
NSF/ANSI/CAN 61: Q≤0.5