Dahl Valve Limited

mini-ball™ Valves

Supply Stops 616SS-53-31 (Iron)

Product Type
Supply Stop
Description
1/2 FIP X 3/8 OD Comp
Material
Lead-Free Brass

Specifications

Pattern
Angle
Finish
Plated
Operation
Loose Key with Screwdriver Slot

Inlet

Inlet Pipe Type
Iron
Inlet Size
1/2

Outlet

Outlet Pipe Type
Copper Compression
Outlet Size
3/8 OD Comp

Packaging Details

Box / Case
24 / 144

Dimensions

Unit Weight (lbs.)
0.6807

Instructions for 616SS-53-31

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.

COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.

Certifications

NSF/ANSI 61-G

Documentation

Options

Options (French)

Submittal Sheet

TDS 653 (53-31).pdf