Dahl Valve Limited

mini-ball™ Valves

Retrofit 511-41-01

Product Type
Retrofit Valve
Description
3/8 OD Fem. Comp X 1/2 Fem. Solder or 1/2 MIP
Material
Lead-Free Brass

Specifications

Pattern
Straight
Finish
Plated
Operation
Plated Handle

Inlet

Inlet Pipe Type
Female/Reverse Compression
Inlet Size
3/8 OD

Outlet

Outlet Pipe Type
Iron
Outlet Size
1/2

Packaging Details

Box / Case
24 / 144

Dimensions

Unit Weight (lbs.)
0.4048

Instructions for 511-41-01

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

FEMALE COMPRESSION: Do not use pipe dope or PTFE tape. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN.

FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.

NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.

Certifications

NSF/ANSI 61-G