dahl Ask for it by nameĀ®

mini-ball™ Valves

mini-ball™Valves, In-Line Stops & Isolation 521-PX3-33 (PEX-F1807 Crimp)

In-Line Stops & Isolation 521-PX3-33 (PEX-F1807 Crimp)

Product Type
Stop & Isolation Valve
Description
1/2 Crimpex X 5/8 OD Comp
Material
Lead-Free Brass

Specifications

Pattern
Straight
Finish
Rough Brass
Operation
Plated Handle

Inlet

Inlet Pipe Type
PEX
Inlet Size
1/2

Outlet

Outlet Pipe Type
Copper
Outlet Size
5/8 OD

Packaging Details

Box / Case
24 / 144

Dimensions

Unit Weight (lbs.)
0.4294

Instructions for 521-PX3-33

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

CRIMPEX (Crimp for PEX): Follow tube manufacturer's instructions. Warning: Do not attempt to use PEX connections with Poly-B tubing or vice versa.

COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.

Features and Benefits

In-Line Stop with Drain Screw and O-ring seal.

Hundreds of models available.

Every valve is tested before leaving our factory.

They may build them with something else, but they fix them with these.

ASTM

ASTM F1807

Certifications


NSF/ANSI/CAN 372
NSF/ANSI/CAN 61: Q≤0.5