dahl Ask for it by nameĀ®

mini-ball™ Valves

mini-ball™Valves, Hose and Boiler Drain 211-01-04-PK2 (Iron)

Hose and Boiler Drain 211-01-04-PK2 (Iron)

Product Type
Hose Valve
Description
1/2 Fem. Solder or 1/2 MIP X Male Hose Pkg of 2 w/red & blue handles
Material
Regular Brass

Specifications

Pattern
Angle
Finish
Plated
Operation
Plated Handle

Inlet

Inlet Pipe Type
Iron
Inlet Size
1/2

Outlet

Outlet Pipe Type
Hose

Packaging Details

Box / Case
12 / 72

Operating Specifications

Working Pressure
250 PSI
Working Temperature
250

Dimensions

Unit Weight (lbs.)
0.7306

Instructions for 211-01-04-PK2

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.

FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.

HOSE: Tighten firmly. DO NOT OVER-TIGHTEN.

Features and Benefits

hose valves are suitable for both plumbing and heating applications.

Every valve is tested before leaving our factory.

Certifications

Submittal Sheet

TDS 22 (01-04).pdf