mini-ball™ Valves
|
|
|
Hose and Boiler Drain 621-23-04 (Copper)
- Product Type
- Hose Valve
- Description
- 1/2 Male Solder X Male Hose
- Material
- Lead-Free Brass
Specifications
- Pattern
- Angle
- Finish
- Rough Brass
- Operation
- Plated Handle
Inlet
- Inlet Pipe Type
- Copper
- Inlet Size
- 1/2
Outlet
- Outlet Pipe Type
- Hose
Packaging Details
- Box / Case
- 24 / 144
Dimensions
- Unit Weight (lbs.)
- 0.5474
Instructions for 621-23-04
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
MALE SOLDER: Do not dismantle valve – solder in open position. Clean mating part and valve end with emery cloth & apply flux to both. Valve must be bottomed in mating part. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
HOSE: Tighten firmly. DO NOT OVER-TIGHTEN.
Features and Benefits
dahl hose valves are suitable for both plumbing and heating applications.
Every valve is tested before leaving our factory.
Certifications
NSF/ANSI/CAN 372
NSF/ANSI/CAN 61: Q≤0.5