Dahl Valve Limited

mini-ball™ Valves

mini-ball™Valves, Dual Outlet Valves 611-53-31-31 (Iron)

Dual Outlet Valves 611-53-31-31 (Iron)

Product Type
Dual Outlet Valve
Description
1/2 FIP X 3/8 OD Comp X 3/8 OD Comp
Material
Lead-Free Brass

Specifications

Pattern
Angle
Finish
Plated
Operation
Plated Handle

Inlet

Inlet Pipe Type
Iron
Inlet Size
1/2

Outlet

Outlet Pipe Type
Copper
Outlet Size
3/8 OD

Branch

Branch Pipe Type
Copper
Branch Size
3/8 OD

Packaging Details

Box / Case
12 / 72

Dimensions

Unit Weight (lbs.)
0.6699

Instructions for 611-53-31-31

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.

COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.

Features and Benefits

The first 1/4 turn dual outlet valve on the market is still the best.

Every valve is tested before leaving our factory.

Hundreds of models available.

Certifications

NSF/ANSI 61-G