Dahl Valve Limited

mini-ball™ Valves

mini-ball™Valves, Dual Outlet Valves 511-QG3-31-30

Dual Outlet Valves 511-QG3-31-30

Product Type
Dual Outlet Valve
Description
1/2 QUICK-GRIP X 3/8 OD Comp X 1/4 OD Comp
Material
Lead-Free Brass

Specifications

Pattern
Straight
Finish
Plated
Operation
Plated Handle

Inlet

Inlet Pipe Type
Copper, PEX, CPVC
Inlet Size
1/2

Outlet

Outlet Pipe Type
Copper
Outlet Size
3/8 OD

Branch

Branch Pipe Type
Copper
Branch Size
1/4 OD

Packaging Details

Box / Case
12 / 72

Dimensions

Unit Weight (lbs.)
0.6913

Instructions for 511-QG3-31-30

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

QUICK-GRIP™ For 1/2" Copper, PEX or CPVC pipe, in accessible locations only. NOT for Kitec® , PEX-AL-PEX, Poly-B, plated pipe. Cut pipe & de-burr. Mark pipe 1-1/8" (2.9 cm) from end. (PEX only: Install pipe insert). QUICK-GRIP™ must be free of debris. Push valve onto pipe to the mark. Pull to test joint. Removal: Remove Locking Clip, depress end of QUICK-GRIP™, pull valve off.

COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.

Features and Benefits

The first 1/4 turn dual outlet valve on the market is still the best.

Every valve is tested before leaving our factory.

Hundreds of models available.

Certifications

NSF/ANSI 61-G

ASSE 1061