Dahl Valve Limited

Hanger and Straps, Test Caps

Hanger and Straps,Test Caps, Tube Clamps 9116

Tube Clamps 9116

Product Type
Tube Clamps
1/2" Solid Copper Tube Clamps, 10/bag

Packaging Details

Box / Case
- / 100


Unit Weight (lbs.)

Instructions for 9116

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.

COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or an insert may be required.

Features and Benefits

Another quality product manufactured, and not imported, by

Only North American materials are used in our Tube Clamps to ensure the highest possible quality

Nails included