Dahl Valve Limited

Hanger and Straps, Test Caps

Test Caps 9152

Product Type
Test Caps - Copper
Description
3/4" Test Caps, 10/bag
Material
Copper

Packaging Details

Qty/Bag
10
Box / Case
10 / 60

Dimensions

Unit Weight (lbs.)
0.0764

Instructions for 9152

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

CRIMPEX (Crimp for PEX): Follow tube manufacturer's instructions. Warning: Do not attempt to use PEX connections with Poly-B tubing or vice versa.

COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or an insert may be required.

COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or an insert may be required.

Submittal Sheet

TDS 306 (9151 to 9156).pdf