Corporation and Water Meter Valves E2307-6162
- Product Type
- Corporation and Water Meter Valve
- E2307 3/4C X 3/4F, ECO *
- Lead-Free Brass
- Rough Brass
- Box / Case
- 6 / 36
Instructions for E2307-6162
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.