- Product Type
- Retrofit Tee
- 3/8 OD Fem. Comp X 3/8 OD Comp
- Lead-Free Brass
- Rough Brass
- Inlet Pipe Type
- Inlet Size
- 3/8 OD
- Outlet Pipe Type
- Outlet Size
- 3/8 OD
- Box / Case
- 24 / 144
Instructions for E41-31-30
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
FEMALE COMPRESSION: Do not use pipe dope or PTFE tape. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN.
COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.
Features and Benefits
dahl can produce thousands of models of common and specialty end-of-line tees.
Need something special? Just ask for it and it will ship same or next day from dahl .
Every fitting is tested before leaving our factory.