Dahl Valve Limited

Fittings

No image is available for E41-31-14WHA-PL

Tees E41-31-14WHA-PL

Product Type
Mini-Ball Tee
Description
3/8 OD Fem. Comp X 3/8 OD Comp X Water Hammer Arrester
Material
Lead-Free Brass

Specifications

Pattern
Tee
Finish
Plated

Inlet

Inlet Pipe Type
Female/Reverse Compression
Inlet Size
3/8 OD

Outlet

Outlet Pipe Type
Copper Compression
Outlet Size
3/8 OD Comp

Branch

Branch Pipe Type
Water Hammer Arrester

Packaging Details

Box / Case
12 / 72

Dimensions

Unit Weight (lbs.)
0.4282

Instructions for E41-31-14WHA-PL

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

FEMALE COMPRESSION: Do not use pipe dope or PTFE tape. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN.

COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.

Position arrester at any angle.