Dahl Valve Limited

Fittings

Fittings, Tees E33-33-51

Tees E33-33-51

Product Type
Mini-Ball Tee
Description
5/8 OD Comp X 5/8 OD Comp X 1/4 FIP
Material
Lead-Free Brass

Specifications

Pattern
Tee
Finish
Rough Brass

Inlet

Inlet Pipe Type
Copper
Inlet Size
5/8 OD

Outlet

Outlet Pipe Type
Copper
Outlet Size
5/8 OD

Branch

Branch Pipe Type
Iron
Branch Size
1/4

Packaging Details

Box / Case
24 / 144

Dimensions

Unit Weight (lbs.)
0.1527

Instructions for E33-33-51

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.

NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.

Certifications

NSF/ANSI 61-G