Fittings
|
|
|
Tees E04F-04-13
- Product Type
- Mini-Ball Tee
- Description
- Fem. Swivel Hose X Male Hose X 1/2 Fem. Solder
- Material
- Lead-Free Brass
Specifications
- Pattern
- Tee
- Finish
- Rough Brass
Inlet
- Inlet Pipe Type
- Hose
Outlet
- Outlet Pipe Type
- Hose
Branch
- Branch Pipe Type
- Copper
- Branch Size
- 1/2
Packaging Details
- Box / Case
- 24 / 144
Operating Specifications
- Working Temperature
- 250
Instructions for E04F-04-13
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
HOSE: Tighten firmly. DO NOT OVER-TIGHTEN.
FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
Features and Benefits
dahl can produce thousands of models of common and specialty end-of-line tees.
Need something special? Just ask for it and it will ship from dahl.
Every fitting is tested before leaving our factory.
Certifications
NSF/ANSI 61