dahl Ask for it by nameĀ®

Fittings

No image is available for 14-J12-53

Tees Vent 14-J12-53

Product Type
Vent Tee
Description
3/4 Fem. Solder X #12 JIC Male Flare X 1/8 FIP
Material
Regular Brass

Specifications

Pattern
Tee
Finish
Rough Brass

Inlet

Inlet Pipe Type
Copper
Inlet Size
3/4

Outlet

Outlet Pipe Type
Copper
Outlet Size
#12

Branch

Branch Pipe Type
Iron
Branch Size
1/8

Packaging Details

Box / Case
12 / 72

Operating Specifications

Working Temperature
250

Instructions for 14-J12-53

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.

MALE FLARE: Do not use pipe dope or PTFE tape. Tighten firmly with wrench. DO NOT OVER-TIGHTEN.

NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.