- Product Type
- 2204V 3/4M Venturion x 3/4 C Un
- Regular Brass
- Rough Brass
- Inlet Pipe Type
- Inlet Size
- Outlet Pipe Type
- Outlet Size
- Box / Case
- 4 / 24
- Unit Weight (lbs.)
Instructions for 2204V
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.
FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
Features and Benefits
For flow measurement from 0.4 to 1.75 or 1.75 to 6.0 USGPM (2000 and 6000 series, respectively).
Install next to valves or fittings for flow measurement
No need for pipe lengths before or after Venturion