mini-ball Balancing Valves 121BAL-23-K3
- Product Type
- Mini-Ball Balancing Valve
- 1/2 Male Solder X 1/2 PEX-AL-PEX Comp
- Regular Brass
- Rough Brass
- Plated Handle
- Inlet Pipe Type
- Inlet Size
- Outlet Pipe Type
- Outlet Size
- Box / Case
- 12 / 72
- Unit Weight (lbs.)
Instructions for 121BAL-23-K3
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
MALE SOLDER: Do not dismantle valve – solder in open position. Clean mating part and valve end with emery cloth & apply flux to both. Valve must be bottomed in mating part. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
KITEC®, PEX-AL-PEX, or Multicore for Crimp or Compression: Follow pipe manufactuer's instructions.
Features and Benefits
Integral Metering Spindle ensures simple and linear balancing, averaging 10% of max flow per turn.
Compact size enables closer centres on copper manifolds.
Instructions for balancing by loop length are shipped with every valve.
Tamper resistant Safety Cap.