dahl Ask for it by nameĀ®

Balancing

Balancing, mini-ball™ Balancing Valves 121BAL-13-QG3

mini-ball Balancing Valves 121BAL-13-QG3

Product Type
Mini-Ball Balancing Valve
Description
1/2 Fem. Solder X 1/2 QUICK-GRIP
Material
Regular Brass

Specifications

Pattern
Straight
Finish
Rough Brass
Operation
Plated Handle

Inlet

Inlet Pipe Type
Copper
Inlet Size
1/2

Outlet

Outlet Pipe Type
Copper, PEX, CPVC
Outlet Size
1/2

Packaging Details

Box / Case
12 / 72

Dimensions

Unit Weight (lbs.)
0.8836

Instructions for 121BAL-13-QG3

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.

QUICK-GRIP™ For 1/2" Copper, PEX or CPVC pipe, in accessible locations only. NOT for Kitec® , PEX-AL-PEX, Poly-B, plated pipe. Cut pipe & de-burr. Mark pipe 1-1/8" (2.9 cm) from end. (PEX only: Install pipe insert). QUICK-GRIP™ must be free of debris. Push valve onto pipe to the mark. Pull to test joint. Removal: Remove Locking Clip, depress end of QUICK-GRIP™, pull valve off.

Features and Benefits

Integral Metering Spindle ensures simple and linear balancing, averaging 10% of max flow per turn.

Compact size enables closer centres on copper manifolds.

Instructions for balancing by loop length are shipped with every valve.

Tamper resistant Safety Cap.

Positive Shuf-Off.

Certifications

ASSE 1061