dahl Ask for it by nameĀ®

mini-ball™ Valves

mini-ball™Valves, Supply Stops 616SS-13-31 (Copper)

Supply Stops 616SS-13-31 (Copper)

Product Type
Supply Stop
Description
1/2 Fem. Solder X 3/8 OD Comp
Material
Lead-Free Brass

Specifications

Pattern
Angle
Finish
Plated
Operation
Loose Key with Screwdriver Slot

Inlet

Inlet Pipe Type
Copper
Inlet Size
1/2

Outlet

Outlet Pipe Type
Copper
Outlet Size
3/8 OD

Packaging Details

Box / Case
24 / 144

Dimensions

Unit Weight (lbs.)
0.5708

Instructions for 616SS-13-31

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.

COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or insert may be required.

Features and Benefits

Every valve is tested before leaving our factory.

They may build them with something else, but they fix them with these.

Certifications


NSF/ANSI/CAN 372
NSF/ANSI/CAN 61: Q≤0.5

Documentation

Options

Options (French)

Submittal Sheet

TDS 661 (13-31).pdf