dahl Ask for it by name®

mini-ball™ Valves

Previous Product Return Next Product
mini-ball™Valves, Finishing Valves 611-63LE-31-14WHA

Finishing Valves 611-63LE-31-14WHA

Product Type
Finishing Valve
Description
1/2 MIP 2-1/2" Ext. X 3/8 OD Comp x Water Hammer Arrester
Material
Lead-Free Brass

Specifications

Pattern
Angle
Finish
Plated
Operation
Plated Handle

Inlet

Inlet Pipe Type
Iron
Inlet Size
1/2

Outlet

Outlet Pipe Type
Copper Compression
Outlet Size
3/8 OD Comp

Branch

Branch Pipe Type
Water Hammer Arrester

Packaging Details

Box / Case
6 / 36

Instructions for 611-63LE-31-14WHA

Turn off water supply. Install product. Turn on water supply, check for leaks. assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.

NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.

COMPRESSION ON COPPER PIPE: Do not use pipe dope or PTFE tape. Pipe must be clean, de-burred, round, & cut square. Slide nut, then ring, then valve onto pipe. Tighten firmly with small wrench. DO NOT OVER-TIGHTEN. Compression on plastic tube: Follow tube manufacturer's instructions; Special ring, nut, or an insert may be required.

Position arrester at any angle.