Fittings
|
|
|
Elbows - Union 18000-4112
- Product Type
- Union Elbow
- Description
- 18000 1/2 FIP x 1/2 Dual Un Elbow
- Material
- Regular Brass
Specifications
- Pattern
- Angle
- Finish
- Rough Brass
Inlet
- Inlet Pipe Type
- Iron
- Inlet Size
- 1/2
Outlet
- Outlet Pipe Type
- Iron/Copper
- Outlet Size
- 1/2
Packaging Details
- Box / Case
- 12 / 72
Dimensions
- Unit Weight (lbs.)
- 0.3924
Instructions for 18000-4112
Turn off water supply. Install product. Turn on water supply, check for leaks. dahl assumes no responsibility for failure due to improper installation. Abide by local plumbing codes. Do not expose to corrosive agents.
NPT THREAD: Clean pipe threads and cover them with pipe dope or PTFE tape. Tighten firmly while gripping hex on end of valve. DO NOT OVER-TIGHTEN.
FEMALE SOLDER: Do not dismantle valve – solder in open position. Clean pipe and valve socket with emery cloth, & apply flux to both. Pipe must be square and bottomed in socket. DO NOT re-position valve after soldering. Clean with water and dry. Let cool before operating.
Submittal Sheet
TDS 1014 (180004112).pdf